Lofting Ribs with just two profiles: Curves Workbench Mult-iloft Method

In my 'Lofting Ribs with just two profiles: Part Loft Method' I went into detail how to create multiple profiles from two profiles and a single loft. The trouble is that if we want to lighten the profile we had to do this by creating separate sketches and lofts which were cut away from the loft. We are going to explore a shortcut which allows us to do this all in one go; the curves workbench multi loft tool.

Let's take two profiles. Note compared to the previous tutorial all the lighting of the profile has been done in one sketch.

We need to create a face from the sketch. Jump over to the part workbench and select one of the sketches and click top menu > part > make face from wires.

You will see a face added to the treeview. Repeat for the other sketch.

Jump over to the Curves workbench and ctrl select both faces.

Click on the top menu > surfaces > multiloft. Our loft is complete and ready for cutting as in my 'Lofting Ribs with just two profiles: Part Loft Method'.

Comments

Beginners FreeCAD: Exercise 5.1 & 5.2 (Reference Images)

Welcome to the total beginners course to FreeCAD 0.20. In this is a two part lesson we will practice our tracing skill in the form of a mini project. Using the below reference photos we will create a more complex part which will consist of repeating features. We will utilise the symmetry tools to ease construction in both FreeCAD sketcher and Part Design workbench. This project work will help teach the fundamentals of freeCAD allowing a understanding of the basics but delivering this information via teaching you different workflows. In this tutorial we will be tracing photos imported into FreeCAD via the image workbench https://wiki.freecadweb.org/Image_Workbench JUMP TO IMAGES Do you want to purchase the complete series along with others and keep forever? Check out my shop https://ko-fi.com/mang0/shop The story of this tutorial The idea and first attempt at creating this tutorial was back in FreeCAD 0.18. The physical part itself, well, I have no idea what really it is, i...

FreeCAD For Beginners: CAD Thinking Part 1

Step-by-Step CAD Thinking FreeCAD Tutorial: Modeling a Latch Part (Part 1) Learning how to turn real life objects into CAD Models. Using FreeCAD we explain at a beginner level how to break down a physical object into its primitive shapes to digitise it into a 3D model, with this episode we are looking at a multi-part assembly, modelling each piece individually. The series aims to open your eyes and mind giving you the ground skills to pick the correct profiles, geometry and workflow when it comes to modelling your parts. This is not just for FreeCAD but for all CAD packages out there. Introduction This tutorial is the first in a series guiding you through modeling a latch assembly in FreeCAD (version 0.21) using the Part Design and A2Plus workbenches. It focuses on modeling the first part (a slotted component) by selecting the top profile to create a slot and adding side arcs, emphasizing CAD thinking to break down complex shapes into primitives. The tutorial highlights model stability...

Modeling Flowcharts For Basic Beginners FreeCAD v1

Th following flowcharts are used in the Basic Beginners FreeCAD v1 course. They consist of two flows, one for simplifying the model and one for identifying the individual features and how to model them. The flowcharts can downloaded by clicking on them, they will then open in a new page, from there right click on the image and save as. Flowcharts can be found below. Current flowchart version is version 1.0.0 Own my courses forever, check out my shop https://ko-fi.com/mang0/shop Own my courses forever, check out my shop https://ko-fi.com/mang0/shop

FreeCAD Blog By MangoJelly Solutions

Search This Blog